Bandai 2003
From WSdev Wiki
Jump to navigationJump to search
In addition to the normal Cartridge banking interface, Bandai's 2003 adds registers for an RTC interface, GPO pins, self flashing, and accessing more than 16MiB of ROM.
| Category | Port | Description | Bits | Type | Notes |
|---|---|---|---|---|---|
| RTC | $CA | RTC Command | ...1 CCCC | W8 | Command (C) |
| RTC Status | D..B CCCC | R8 | Busy (B), Command (C), Data needed (D) | ||
| $CB | RTC Payload | dddd dddd | RW8 | Data (d) | |
| GPO | $CC | GPO Data Direction | 0000 oooo | RW8 | 1 = output, 0 = high-impedance (weak pull-down) |
| $CD | GPO Data | 0000 dddd | RW8 | 1 = 3V, if enabled by data direction | |
| Self-Flash | $CE | Self-Flash Control | 0000 000r | RW8 | 1 = ROM is accessible at segment 0x1000;
0 = RAM instead. |
| Extended bankswitching | $CF | ROM Linear (EX) Bank | 00bb bbbb | RW8 | Selects a 1MiB bank accessed via segments 0x4000 through 0xF000. Identical to the register at 0xC0. |
| $D0 | RAM(/ROM) Bank | 0000 00bb bbbb bbbb | RW16 | Selects a 64KiB bank accessed via segment 0x1000. Lower 8 bits are identical to the register at 0xC1. | |
| $D2 | ROM0 Bank | 0000 00bb bbbb bbbb | RW16 | Selects a 64KiB bank accessed via segment 0x2000. Lower 8 bits are identical to the register at 0xC2. | |
| $D4 | ROM1 Bank | 0000 00bb bbbb bbbb | RW16 | Selects a 64KiB bank accessed via segment 0x3000. Lower 8 bits are identical to the register at 0xC3. |
Not all PCBs are wired to support self-flashing. Not all ROMs have the needed /BYTE pin. Even on PCBs without support, ROM can still be enabled by writing to port $CE.
